Brother International Innov-is 4750D Instruction Manual for Bobbin work - Page 5
Required Materials
View all Brother International Innov-is 4750D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENGLISH Required Materials ■ Bobbin Case and Bobbin Cover a Bobbin case (gray) This bobbin case is only for bobbin work. The bobbin case will allow you to sew with thick thread or narrow ribbon that cannot be inserted through the eye of the needle. There is a notch at the location indicated by the letter "A". ■ Upper Thread Sewing machine embroidery thread (polyester thread) or monofilament (transparent nylon) thread. If you do not wish for the upper thread to be visible, we recommend using transparent nylon monofilament thread or polyester light weight thread (50wt. or above) that is the same color as the lower thread. ■ Needle Use a needle appropriate for the upper thread and fabric being used. For details, refer to your machine's Operation Manual. ■ Presser Foot Utility stitches or decorative stitches: Monogramming foot "N" b Bobbin cover There are ribs "B" on the back of the bobbin cover. The ribs press down on the bobbin so it is not lifted out when thick thread is being fed from it. ■ Lower Thread We recommend the following types of threads for bobbin work. No.5 or finer hand embroidery thread or decorative thread Flexible woven ribbon (approx. 2mm (approx. 5/64 inch) recommended) Note • If monogramming foot "N" was not provided with your machine, use zigzag foot "J". • When sewing a pattern described in the machine's Operation Manual and the monogramming foot "N" is recommended, be sure to use this foot, otherwise the desired results may not be achieved. Free-motion sewing: Use the free-motion quilting foot provided with your machine. If you do not have a freemotion quilting foot, contact your nearest authorized dealer to purchase one. Fine embroidery ribbon (silk or silk-like material) (3.5 mm (approx. 1/8 inch) or less, recommended) * If ribbon is to be used, we recommend that tension not be applied. Refer to page 6 for more detailed instructions. Note • Do not use thread heavier than No.5 hand embroidery thread. • Some threads may not be appropriate for bobbin work. Be sure to sew trial stitches before sewing on your project. Free-motion quilting foot Free-motion open toe quilting foot "O" 3