Canon FAXPHONE L90 Reference Guide FAXPHONE L90 - Page 144

Before Using the Machine 1 Document and Paper 2 Sending and Receiving 3 Copying 4 Printing 5 System Manager Settings 6 Maintenance 7 Troubleshooting 8 Appendix 9 Back Previous Next TOP Q Are documents stored in memory, leaving little or No automatic switching between telephone and fax calls. no memory available? Q Is the machine set to switch automatically between A Print, send, or delete any documents stored in telephone and fax calls? memory. A For the machine to switch between fax and telephone Q Has an error occurred during reception? calls automatically, the receive mode must be set to , , or . If you have set A Check the LCD for an error message. (See "LCD , confirm that an answering machine is Messages," on p. 8-10.) connected to the machine and that it is turned on with an outgoing message properly recorded. (See A Print an Activity Report and check for an error. (See "Basic Receiving Method," on p. 3-22.) "ACTIVITY REPORT," on p. 9-22.) Q Is paper loaded in the machine? Q Are documents stored in memory, leaving little or no memory available? A Make sure paper is loaded in the machine. (See "Set Up the Machine," in the Starter Guide.) A Print, send, or delete any documents stored in memory. Q Is the telephone cable connected properly? Q Has an error occurred during reception? A Make sure the cable is connected properly. (See "Before FAX Setting," in the Starter Guide.) A Check the LCD for an error message. (See "LCD Messages," on p. 8-10.) A Print an Activity Report and check for an error. (See "ACTIVITY REPORT," on p. 9-22.) Table of Contents Index 8-25