Canon FAXPHONE L90 Reference Guide FAXPHONE L90 - Page 72

Before Using the Machine 1 Document and Paper 2 Sending and Receiving 3 Copying 4 Printing 5 System Manager Settings 6 Maintenance 7 Troubleshooting 8 Appendix 9 6. If you want to set a password, press [ ] or [ ] to select , then press [OK]. If you do not need to set a password, skip to step 8. 7. Use the numeric keys to enter the memory lock reception password (up to seven digits), then press [OK]. Ex. PASSWORD=5678_ If the memory lock password has already been set, press [ ] repeatedly to go to the digit you want to change, and then press [Clear]. Enter a new number with the numeric keys, then press [OK]. 8. If you want to specify , press [ ] or [ ] to select , then press [OK]. If you do not need to set the timer for memory lock, skip to step 12. 9. Press [ ] or [ ] to select , then press [OK]. 10. For , use the numeric keys to enter the start time (in 24-hour military time format), then press [OK]. Ex. MEM. RX START TIME 00:00 Back Previous Next TOP 11. For , use the numeric keys to enter the end time (in 24-hour military time format), then press [OK]. 12. Press [Stop/Reset] to return to the standby mode. Printing All Documents Stored in Memory 1. Perform step 1 to 3 in "Memory Lock Reception," on p. 3-25. 2. Press [ ] or [ ] to select , then press [OK]. 3. Use the numeric keys to enter the memory lock reception password, then press [OK]. 4. Press [ ] or [ ] to select , then press [OK]. The received documents are printed. 5. Press [Stop/Reset] to return to the standby mode. Table of Contents Index 3-26