Canon MultiPASS F80 MultiPASS F80 Comprehensive Guide - Page 22
Bubble Jet Paper LC-301, High Resolution Paper HR-101N, Glossy Photo Paper GP-301/GP-301N
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Bubble Jet Paper LC-301 Developed for high quality printing with minimal or no smearing when in contact with water or damp surfaces. This specially coated paper produces bright and vivid colors and stands up to normal office highlighters. Size: Letter, A4 Quantity: Approx. 100 sheets (20 lb. or 75 g/m2) or maximum stack height of 0.4 in. (10 mm) Paper thickness lever position: Left Use for: All functions High Resolution Paper HR-101N Designed to produce near-photographic quality print output with sharp and vivid graphics. Size: Letter, A4 Quantity: Approx. 80 sheets or maximum stack height of 0.4 in. (10 mm) Paper thickness lever position: Left Use for: Printing from your computer/copying • Load the paper with the whiter side facing up. • Remove the sheets from the paper output tray before the count reaches 50. If the paper curls, remove each sheet as it is delivered in the paper output tray. Glossy Photo Paper GP-301/GP-301N A high gloss, thick paper that produces the look and feel of a photograph. Size: Letter, A4 Quantity: 1 sheet Paper thickness lever position: Left Drying time: 2 minutes Use for: Printing from your computer/copying • Remove each sheet after it is delivered, being careful not to touch any surfaces. Do not allow the paper to stack up in the paper output tray. • Load the paper with the whiter side facing up. • Do not use the loading support sheet included with this print media. Glossy Photo Cards FM-101 Made from the same stock as Glossy Photo Paper GP-301, these cards allow you to print images over the entire area of the card. Size: 4.7 × 8.4 in. (119 × 214 mm) Quantity: 20 sheets Paper thickness lever position: Left Drying time: 2 minutes Use for: Printing from your computer/copying • Print the image so that it extends beyond the perforations and then trim off the unwanted white margins. • Load the paper with the glossy side facing up. • Do not use the loading support sheet included with this print media. 3-2 Print media handling Chapter 3