Canon MultiPASS F80 MultiPASS F80 Comprehensive Guide - Page 77
Receiving faxes automatically: FAX ONLY MODE
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
10 Press [Set] twice. Ex: R I N G S T A R T T I M E 8SEC 11 Use [2] or [3] to select the time the machine takes to check whether a call is a fax or voice call. 12 Press [Set] twice. F/T RING TIME 15SEC 13 Use [2] or [3] to select the length of time the machine rings when the call is a voice call. 14 Press [Set] twice. DEFAULT ACTION RECEIVE 15 Use [2] or [3] to select whether the machine switches to receive mode or disconnects the call if no one answers a voice call after the specified time in step 13. • Select: - to switch to receive mode. - to disconnect the call. 16 Press [Set]. 17 Press [Stop/Reset]. Receiving faxes automatically: FAX ONLY MODE Choose this mode if: • you have a dedicated telephone line for fax use only. • you only want to receive faxes automatically with your machine. You will need to: • connect your machine to a dedicated telephone line ( Setup Sheet). • set ( p. 9-1). When you receive a fax call: The machine will receive the fax automatically. NOTE • The machine does not ring when it receives a fax call. If you want it to ring, connect a telephone to your machine and enable the setting ( p. 13-5). You can also select the number of rings before the machine answers ( , p. 13-5). When you receive a voice call: The machine will answer as if it were a fax call. If no fax comes through, the machine will disconnect the call. Chapter 9 Receiving faxes 9-3