Canon MultiPASS F80 MultiPASS F80 Comprehensive Guide - Page 91
Press [Open], Hold the ink tank as shown
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
2 Press [Open] q and lift up the scanning unit w. • The printhead holder automatically moves to the center of the machine. CAUTION • Do not try to manually move or stop the printhead holder. • Do not touch any metal parts. 3 Press on the tab to release the empty ink tank q, then remove it from its slot w. CAUTION • Do not remove the printhead from the machine. • If several ink tanks need replacing, remove and replace each one individually. IMPORTANT • Discard the empty ink tank immediately according to local laws and regulations for disposal of consumables. • Handle ink tanks carefully to avoid staining clothing or the surrounding area. 4 Pull the orange tape in the direction of the arrow and remove the plastic wrapper so you can see the air hole A. Hold the ink tank as shown and remove the protective cap B. • To avoid spilling ink, never press on the long sides of the ink tank C. • Once you remove the cap B, do not touch the ink port D. 5 Insert the ink tank into the empty slot on the printhead. Press down gently on the ink tank until an audible click is heard. • Make sure the ink tank is the correct color for the slot. 6 Close the scanning unit until it locks into place. w q w q B A Ink Tank BCI-3eY DC Chapter 11 Maintenance 11-5