Canon MultiPASS F80 MultiPASS F80 Comprehensive Guide - Page 29
Loading banner paper, the edge as it exits the machine.
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Loading banner paper NOTE • Always leave an extra sheet at the end of the banner-just in case the type runs over. • Printing on banner paper may require considerable amounts of ink, so use new ink tanks if necessary. • For best print results on banner paper, use light design patterns. Follow this procedure to load banner paper in the multi-purpose tray. 1 Make sure the paper thickness lever is set to the right. • For details, see p. 3-5. 2 Remove the tray cover and multi-purpose tray, and place the machine near the edge of a table so that the paper can flow over the edge as it exits the machine. 3 Cut the banner paper to the required length and place it behind the machine w q on a flat surface. Then insert the first sheet and press gently down on the sheet q. Adjust the paper guide to the width of the paper w. • Press down gently on the sheet until paper feeding starts. • Make sure the sheets behind the machine are aligned with the first sheet. 4 Set your computer to print on banner paper. • Allow the paper to flow over the edge of the table as it exits the machine. Chapter 3 Print media handling 3-9