Canon MultiPASS F80 MultiPASS F80 Comprehensive Guide - Page 31
Inserting/removing a memory card, Removing a memory card - on windows 7
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Inserting/removing a memory card Inserting a memory card To use a memory card, you will need to insert it into a PC card adapter before inserting it in the card slot. Do not attempt to insert it into the card slot without a PC card adapter. 1 Make sure the machine is on. • If not, press [ON/OFF(1 sec.)]. 2 Insert the memory card into the PC card adapter. 3 Insert the PC card adapter all the way into the card slot on the right side of the machine. • The indicator light A turns on. NOTE A • If the memory card cannot be read, check that: - the PC card adapter containing the memory card is inserted all the way into the card slot. - the PC card adapter containing the memory card was not removed while being read. - you are using a compatible memory card. - your memory card contains photographs. Removing a memory card CAUTION • Do not remove the memory card or turn off the machine when the indicator light is blinking as this may damage the data in the memory card. 1 Check that the indicator light is not blinking q, then press [ON/OFF(1 sec.)] w q to turn the machine off w. • If you have been writing to a memory card in Windows 2000, wait a few seconds before turning off the machine. 4-2 Photo printing from a memory card Chapter 4