Canon MultiPASS F80 MultiPASS F80 Comprehensive Guide - Page 45
Improving copied images, Setting color or black & white copying
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Improving copied images Setting color or black & white copying Refer to Making copies on p. 5-1, and in step 4, set color or black & white copying as follows: For color copying: Press [Color] to turn on its light. For black & white copying: Press [B&W] to turn on its light. Adjusting the image quality (resolution) Refer to Making copies on p. 5-1, and in step 4, adjust the image quality as follows: 1 Press [Image Quality]. 2 Use [2] or [3] to select the image quality. • In black & white mode, select: - for text-only documents. - for photographs. - for high-speed copying at a lower resolution.* In color mode select: - for color text-only documents. - for color photographs. - for high-speed color copying at a lower resolution.* 3 Press [Set]. NOTE • When using , if the color output is different from that expected, select or and try copying again. Adjusting the exposure (density) Exposure (density) is the degree of difference between light and dark. A high contrast setting will make blacks darker and whites brighter, whereas a low contrast setting will make the differences between black and white less marked. Refer to Making copies on p. 5-1, and in step 4, adjust the exposure as follows: 1 Press [Exposure]. 2 Use [2] or [3] to select the exposure. 3 Press [Set]. 5-2 * This setting is only available when is selected as the print media type ( p. 3-6). Copying Chapter 5