Canon MultiPASS F80 MultiPASS F80 Comprehensive Guide - Page 46
Reducing or enlarging a copy, Using custom copy ratios, Copying an image to fit
View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Reducing or enlarging a copy You can reduce or enlarge copies in three different ways: using preset copy ratios, using custom copy ratios, or automatically reducing or enlarging an image to fit on the paper size selected. NOTE • For legal-size documents, the lowermost section of the document may not be copied. Using preset copy ratios Refer to Making copies on p. 5-1, and in step 4, adjust the copy ratio as follows: 1 Press [Enlarge/Reduce]. PRESET RATIO - 100% + 2 Press [2] or [3] to select the copy ratio. • Select from the following: - - - - - - 3 Press [Set]. Using custom copy ratios Refer to Making copies on p. 5-1, and in step 4, adjust the copy ratio as follows: 1 Press [Enlarge/Reduce] twice. ZOOM 25-400% - 100% + 2 Use the numeric keys to enter a copy ratio between 25% and 400%. • You can also use [2] and [3] to select the copy ratio. 3 Press [Set]. Copying an image to fit the page If the document to be copied is on paper larger or smaller than the specified paper size ( p. 3-6), you can automatically reduce or enlarge the image to fit the selected paper size. NOTE • You can only use the platen glass with this feature. • You can only use this feature when the print media size setting is set to , , or . For details on setting the print media size, see p. 3-6. Refer to Making copies on p. 5-1, and in step 4, follow this procedure: 1 Press [Enlarge/Reduce] three times. FIT-TO-PAGE 2 Press [Set]. Chapter 5 Copying 5-3