Canon MultiPASS F80 MultiPASS F80 Comprehensive Guide - Page 94

Aligning the printhead

Get Canon MultiPASS F80 PDF manuals and user guides View all Canon MultiPASS F80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 94 highlights

Aligning the printhead To align the printhead after you have just installed it, follow the procedure in the Setup Sheet. If you have printed the nozzle check pattern ( p. 11-7) and determined that the printhead needs aligning, align it from the operation panel (see below) or from the MultiPASS Suite software ( Software Guide). Follow this procedure to align the printhead from the operation panel: 1 Press [Menu]. 2 Use [2] or [3] to select . 3 Press [Set]. MAINTENANCE 1.NOZZLE CHECK 4 Use [2] or [3] to select . 5 Press [Set]. • The machine prints a horizontal line pattern. CHANGE H VALUE A0 6 In column A on the printout, note which box has the most solid image. Note the value next to this box and use [2] or [3] to enter it. BAD SAMPLE Least solid box GOOD SAMPLE Most solid box 7 Press [Set]. 8 Repeat steps 6 and 7 for columns B to F. When all values have been entered, the LCD displays the following: PRINT VERT.PATTERN? YES=(A) NO= (#) 9 Press [T]. 11-8 Maintenance Chapter 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
11-8
Maintenance
Chapter 11
Aligning the printhead
To align the printhead after you have just installed it, follow the procedure in the
Setup Sheet
.
If you have printed the nozzle check pattern (
²
p. 11-7) and determined that the printhead
needs aligning,align it from the operation panel (see below) or from the MultiPASS Suite
software (
²
Software Guide
).
Follow this procedure to align the printhead from the operation panel:
1
Press [Menu].
2
Use [
2
] or [
3
] to select <MAINTENANCE>.
3
Press [Set].
4
Use [
2
] or [
3
] to select <ALIGN PRINT HEAD>.
5
Press [Set].
•
The machine prints a horizontal line pattern.
6
In column A on the printout, note which box has the most solid image.
Note the value next to this box and use [
2
] or [
3
] to enter it.
7
Press [Set].
8
Repeat steps 6 and 7 for columns B to F.
When all values have been entered, the LCD displays the following:
9
Press [
T
].
PRINT VERT.PATTERN?
YES=(
A
)
NO= (#)
Most solid
box
Least solid
box
BAD SAMPLE
GOOD SAMPLE
CHANGE H VALUE
A
0
MAINTENANCE
1.NOZZLE CHECK