Canon imageFORMULA DR-3010C Compact Workgroup Scanner User Manual - Page 22
Placing Documents, Feeding in the Separation Mode, CAUTION
View all Canon imageFORMULA DR-3010C Compact Workgroup Scanner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
3. Placing Documents There are two methods for feeding documents, the Page Separation mode and Bypass mode. Feeding pages continuously from a stack of documents placed in the feed tray is called the Page Separation mode. Feeding documents one sheet at a time or feeding documents consisting of multiple pages that are attached, is called the Bypass mode. The document feed method can be changed by moving the feed selection lever. 3 Fan the pages of the document to be scanned, and then turn the document so that it is upside down. Feeding in the Page Separation Mode 1 Switch the feed selection lever to (Page Separation). CAUTION When placing documents into the feed tray, take care not to cut your hands on the edges of the paper. 4 Place the document face down, with the top fed through the scanner first. 2 Adjust the document guides to fit the width of the document to be scanned. IMPORTANT There is a load limit mark ( ) on the document guides. Do not stack documents higher than this mark (approximately 50 sheets of 20 lb bond (80 g/ m2) paper.) Doing so may cause a paper jam. 22 DR-3010C