Canon imagePROGRAF iPF650 iPF650 655 750 755 Basic Guide Step2 - Page 28
If Banding Occurs
View all Canon imagePROGRAF iPF650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
If Banding Occurs This topic describes how to adjust the feed amount automatically. If printed images are affected by banding in different colors across the sheet, execute Adj. Quality for automatic adjustment of the paper feed amount. There are two modes of automatic adjustment to correct banding: Auto(GenuinePpr) and Auto(OtherPaper). In either mode, the printer prints and reads a band adjustment test pattern for automatic adjustment of the feed amount. • Auto(GenuinePpr) Use this mode with paper identified in the Paper Reference Guide. (→ , Types of Manuals) • Auto(OtherPaper) Use this mode with paper not in the Paper Reference Guide, or if Auto(GenuinePpr) does not eliminate banding. • Always check the Adj. Priority values before using Auto(GenuinePpr) or Auto(OtherPaper). (→"Selecting a Feed Amount Adjustment Method (Feed Priority)," User Manual) • Adjustment is not possible with Auto(GenuinePpr) and Auto(OtherPaper) when using highly transparent media. In this case, use Manual adjustment. (→"Manual Banding Adjustment (Image Qual. Adj.)," User Manual) • If additional fine-tuning is necessary after Auto(GenuinePpr) and Auto(OtherPaper) , execute Adj. Fine Feed (→"Fine-Tuning the Paper Feed Amount (Adj. Fine Feed)," User Manual) • Use Adjust Length to ensure that lines in CAD drawings are printed at exactly the right length. (→"Adjusting Line Length (Adjust Length)," User Manual) • This may take some time, depending on the type of paper. • Use paper of the same type and size for adjustment as you will use for printing. Paper to Prepare • Rolls An unused roll at least 10 inches wide • Sheets Auto(GenuinePpr): One sheet of unused paper of at least A4/Letter size Auto(OtherPaper): Two sheets of unused paper of at least A4/Letter size (or one sheet when using A2 or larger) Perform adjustment as follows. 1 Load the paper. (→ , Attaching the Roll Holder to Rolls) (→ , Loading Rolls in the Printer) (→ , Loading Sheets in the Printer) • Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be completed correctly unless the loaded paper matches the settings. 28