Canon imagePROGRAF iPF650 iPF650 655 750 755 Basic Guide Step2 - Page 47

Error Messages Error Message Paper position not suitable for borderless printing. PaprWidth Mismatch Cause Corrective Action Because paper expands or contracts depending on the environment of use, it may become narrower or wider than the supported width for borderless printing. Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing. Use each type of paper only where the recommended environmental conditions are met. For details on environmental conditions for various paper, see the Paper Reference Guide. (→"Types of Paper," User Manual) Select None when you have set Detect Mismatch in the Control Panel menu to Warning. However, note that this error may affect the printing quality. The paper is loaded askew. Press ▲ or ▼ to select Fix Paper Position and straighten the paper so that the edges are between the ink grooves for borderless printing. Insert the roll firmly until it touches the flange of the Roll Holder. (→ , Attaching the Roll Holder to Rolls) Select None when you have set Detect Mismatch in the Control Panel menu to Warning. However, note that this error may affect the printing quality. Press ▲ or ▼ to select Print With Border, and then press the OK button to continue printing. The document will be printed with a border. When Detect Mismatch in the Control Panel menu is set to Pause or Warning, the width of the loaded roll does not match the width specified in Fit Roll Paper Width in the printer driver. Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note that this error may cause paper jams and affect the printing quality. Press ▲ or ▼ to select Stop Printing, and then press the OK button to stop printing. Follow these steps to replace the roll to match the width specified in the printer driver. 1. Press ▲ or ▼ to select Change Paper, and then press the OK button. (→ , Removing the Roll from the Printer) (→"Removing the Roll Holder from Rolls," User Manual) 2. Replace the paper with paper compatible for borderless printing. (→ , Attaching the Roll Holder to Rolls) (→ , Loading Rolls in the Printer) The printer now starts printing the print job. Make sure the roll width selected in the dialog box displayed when you select Fit Roll Paper Width in the printer driver matches the width of the roll loaded in the printer, and then try printing again. 47