Canon imagePROGRAF iPF650 iPF650 655 750 755 Basic Guide Step2 - Page 32

Error Messages Respond to error messages as follows. Error messages Check the message and take the appropriate action. • Borderless printng not possible. • Cannot adjust paper feed. • Cannot adjust printhead. • Cannot detect papr • Check printed document. • Close Ink Tank Cover • Do not pull out ink tank. • End of paper feed. • Error in cutter position. • Execute printhead cleaning. • File read error. • GARO Wxxxx (x represents a number) • GL2: W0502 The parameter is out of range. • GL2: W0504 This command is not supported. • GL2: Wxxxx The memory is full. (xxxx is 0501, 0903, or 0904) • Hard disk error. • Hardware error. xxxxxxxx-xxxx (x represents a letter or number) • Ink insufficient. • Ink tank is empty. • Insert the maintenance cartridge. • Insufficient paper for job • Mail box full. Now printing without saving data. • Mail box nearly full. • Maint. cart. The level is low • Maintenance cartridge full. • Maintenance cartridge problem. • Maximum jobs stored. • MediaType Mismatch • Multi-sensor error • No ink left. • No ink tank loaded. • No Maintenance Cartridge capacity. • No printhead • Not much ink is left. • Paper cutting failed. • Paper is crooked. • Paper jam • Paper not aligned with right guide. • Paper position not suitable for borderless printing. • Paper size not detected. • PaprWidth Mismatch • Parts replacement time has passed. • Prepare for parts replacement. • Printhead error • Regular printing is selected, but a roll is loaded. • Rel lever is in wrong position. 32