Compaq ProLiant 6400R Compaq ProLiant 6400R Servers - Page 63
Terminator Modules, and Processor Power Modules
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
2-46 Compaq ProLiant 6400R Maintenance and Service Guide 4. Loosen the captive thumbscrew . 5. Rotate the PCI card guide into the up position, and then swivel it away from the chassis . 1 2 Figure 2-44. Rotating the PCI card guide into the up position 6. Remove all PCI expansion boards and the PCI Hot Plug basket insulator. See "PCI Hot Plug Basket Insulator" earlier in this chapter. 7. Remove all processors, PPMs, and terminator modules. See "Processors, Processor Terminator Modules, and Processor Power Modules" earlier in this chapter. 8. Remove the power supply. See "Hot-Plug Power Supply" earlier in this chapter. 9. Remove the memory board. See "Memory Board" in the section entitled "Memory" earlier in this chapter. 10. Remove the peripheral board. See "Peripheral Board" earlier in this chapter. 11. Remove the side access panel. See "Side Access Panel" earlier in this chapter. 12. Remove the system board and tray. See "System Board and Tray" earlier in this chapter. CAUTION: Carefully remove the system board and tray to avoid dislodging components from the system board. 13. Cut and remove the cable tie securing the AC power cord to the chassis.