Compaq ProLiant 6400R Compaq ProLiant 6400R Servers - Page 66
Replacement Battery
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Removal and Replacement Procedures 2-49 19. Lift the AC power cord and plug assembly out of the chassis . 8 Figure 2-49. Removing the AC power cord and plug assembly from the chassis Reverse steps 1 through 19 to replace the AC power cord and plug. Replacement Battery The replacement battery periodically must be changed to insure optimum performance. WARNING: The computer contains an internal lithium manganese dioxide, a vanadium pentoxide, or alkaline battery pack. A risk of fire and burns exists if the battery pack is not handled properly. To reduce the risk of personal injury: Do not attempt to recharge the battery. Do not expose the battery to temperatures greater than 60°C. Do not disassemble, crush, puncture, or dispose of the battery in fire or water. Do not short the external contacts. Replace the battery only with the Compaq spare designated for this product. CAUTION: Batteries, battery packs, and accumulators should not be discarded with general household waste. To recycle or dispose of them, use the public collection system or return them to Compaq, your authorized Compaq Partners, or their agents. To install the replacement battery, 1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter. 2. Remove the top access panel. See "Top Access Panel" earlier in this chapter. 3. Remove the peripheral board. See "Peripheral Board" earlier in this chapter. WARNING: Disconnect all the power cords to remove power from the system completely. You must disconnect the power cord from the server before removing the peripheral board.