Compaq ProLiant 6400R Compaq ProLiant 6400R Servers - Page 76
Error Code, Audible Beeps, Probable Source of Problem, Recommended Action
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Diagnostics and Troubleshooting 3-9 Table 3-2 POST Error Messages continued Error Code Audible Beeps 212-System Processor Failed/ Mapped out 1 short 214-DC-DC None Converter Failed 214-Processor PPM None Failed Module X 215-Processor Power None Module has lost Redundancy in Socket x 215-Nonfunctioning None Voltage Regulator Module for Processors 216-Voltage None Regulator Module for Processor X no longer redundant 216-Processor PPM None has lost Redundancy, Module X 218-Cache None Accelerators Not Installed. System Halted. 219-Tag Update None Rules SRAM Failure. System Halted 219-Snoop Rules None SRAM Failure. System Halted. 220-Cache None Accelerator Slot x Initialization Failed. System Halted. 221-Power Fault On None Processor Bus X 301-Keyboard Error None 301-Keyboard Error None or Test Fixture Installed Probable Source of Problem Processor in slot x failed. Recommended Action Run Diagnostics. Replace the failed processor. PowerSafe Module (DC-DC Converter) failed. Indicated PPM (DC-DC Converter) failed. PPM (DC-DC Converter) has lost redundancy. Run Diagnostics. Replace the failed assembly as indicated. Replace the failed assembly as indicated. Run Diagnostics. Replace the failed assembly as indicated. PPM (DC-DC Converter) has failed or lost redundancy. Run Diagnostics. Replace the failed assembly as indicated. Redundancy failed in PPM. Replace the PPM. Indicated PPM (DC-DC Converter) Replace the failed assembly as has lost redundancy. indicated. Cache accelerators not installed or improperly installed. Check cache accelerator installation. Catastrophic chipset failure. Call Compaq service provider. Catastrophic chipset failure. Call Compaq service provider. Cache accelerator in slot x improperly installed or failed. Check cache accelerator installation. If properly installed, replace it. A PPM on the indicated bus is in a failed state. Keyboard failure Keyboard failure Run Diagnostics. Replace the failed assembly as indicated. Turn off the computer, and then reconnect the keyboard. Replace the keyboard. continued