Compaq ProLiant 6400R Compaq ProLiant 6400R Servers - Page 73
Power-On Self-Test
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3-6 Compaq ProLiant 6400R Maintenance and Service Guide To create diskette versions of the utilities from the CD, 1. Boot the Compaq SmartStart and Support Software CD. 2. From the Compaq System Utilities screen, select Create Support Software Disks, and then select Next. 3. Select the diskette you would like to create from the list, and then follow the instructions on the screen. Running the Utilities from the Compaq SmartStart and Support Software CD IMPORTANT: Only the System Configuration Utility, and Array Configuration Utility, and the Array Diagnostic Utility can be executed from the Compaq SmartStart and Support Software CD. All other utilities must be executed from the system partition or from the diskette. To run these utilities directly from the Compaq SmartStart and Support Software CD, 4. Boot the Compaq SmartStart and Support Software CD. 5. From the Compaq System Utilities screen, select the utility you wish to run, and then select Next. To execute the System Configuration Utility, select Run System Configuration Utility. To execute the Array Configuration Utility, select Run Array Configuration Utility. To execute the Array Diagnostic Utility, select Run Array Diagnostic Utility. Power-On Self-Test POST is a series of diagnostic tests that run automatically on Compaq computers when the system is turned on. POST checks the following assemblies to ensure that the computer system is functioning properly: System ROM Keyboard Power supply System board Memory Memory expansion boards Controllers Diskette drives Hard drives PPMs Fans