Compaq ProLiant 6400R Compaq ProLiant 6400R Servers - Page 89
Primary Processor Test Error Codes
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
3-22 Compaq ProLiant 6400R Maintenance and Service Guide 100 - 199, Primary Processor Test Error Codes The 100 series of diagnostic error codes identifies failures with processor and system board functions. Table 3-3 Primary Processor Test Error Codes Error Code 101-xx 103-xx 104-xx 105-xx 106-xx 107-xx 108-xx 109-xx 110-xx 111-xx 112-xx 113-xx 114-xx 116-xx 122-xx 123-xx 199-xx Description CPU test failed. DMA page registers test failed. Interrupt controller master test failed. Port 61 error. Keyboard controller self-test failed. CMOS RAM test failed. CMOS interrupt test failed. CMOS clock load data test failed. Programmable timer load data test failed. Refresh detect test failed. Speed test slow mode out of range Protected mode test failed. Speaker test failed. Cache test failed. Multiprocessor dispatch test failed. Interprocessor communication test failed Installed devices test failed. Recommended Action Replace the processor board and retest. Replace the processor board and retest. 1. Replace the battery and clock module and retest. 2. Replace the system board and retest. Replace the processor board and retest. 1. Verify the speaker connection and retest. 2. Replace the speaker and retest. 3. Replace the system board and retest. Replace the system board and retest. 1. Check the system configuration and retest. 2. Replace the processor board and retest. 3. Replace the system board and retest. 1. Check the system configuration and retest. 2. Verify cable connections and retest. 3. Check switch and/or jumper settings and retest. 4. Run the Configuration Utility and retest. 5. Replace the processor board and retest. 6. Replace the system board and retest.