Compaq ProLiant 6400R Compaq ProLiant 6400R Servers - Page 90
Memory Test Error Codes, Keyboard Test Error Codes
View all Compaq ProLiant 6400R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Diagnostics and Troubleshooting 3-23 200 - 299, Memory Test Error Codes The 200 series of diagnostic error codes identifies failures with the memory subsystem. Table 3-4 Memory Test Error Codes Error Code 200-xx Description Invalid memory configuration 201-xx 202-xx 203-xx 204-xx 205-xx 206-xx 207-xx 208-xx 210-xx Memory machine ID test failed. Memory system ROM checksum failed. Memory write/read test failed. Memory address test failed. Walking I/O test failed. Increment pattern test failed. Invalid memory configuration. Check DIMM installation. DIMMs installed have 8 K refresh. Invalid memory speed detected. Check DIMM installation. Slow DIMMs may cause data loss. Random pattern test failed. 215 Nonfunctioning DC-DC converter for processor X Recommended Action Reinsert memory modules in correct locations and retest. 1. Replace the system ROM and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest. 1. Replace the system ROM and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest. Replace DIMMs. Replace DIMMs with timing greater than 60 ns. 1. Replace the memory module and retest. 2. Replace the processor board and retest. 3. Replace the memory expansion board and retest. Replace the DC-DC Converter (PPM) 300 - 399, Keyboard Test Error Codes The 300 series of diagnostic error codes identifies failures with keyboard and system board functions. Table 3-5 Keyboard Test Error Codes Error Code 301-xx 302-xx 303-xx 304-xx Description Keyboard short test, 8042 self-test failed. Keyboard long test failed. Keyboard LED test, 8042 self-test failed. Keyboard typematic test failed. Recommended Action 1. Check the keyboard connection. If disconnected, turn off the computer, connect the keyboard, turn on the power, and retest. 2. Replace the keyboard and retest. 3. Replace the system board and retest.