D-Link DES-3028 Product Manual - Page 141

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch Figure 7- 41. Instance ID Settings window - modify The user may configure the following parameters for a MSTI on the Switch. Parameter Description MSTI ID Displays the MSTI ID previously set by the user. Type This field allows the user to choose a desired method for altering the MSTI settings. The user has four choices.  Add - Select this parameter to add VIDs to the MSTI ID, in conjunction with the VID List parameter.  Remove - Select this parameter to remove VIDs from the MSTI ID, in conjunction with the VID List parameter. VID List (1-4094) This field is used to specify the VID range from configured VLANs set on the Switch that the user wishes to add to this MSTI ID. Supported VIDs on the Switch range from ID number 1 to 4094. This parameter can only be utilized if the Type chosen is Add or Remove. Click Apply to implement changes made. STP Instance Settings The following window displays MSTIs currently set on the Switch. To view the following table, click L2 Features > Spanning Tree > STP Instance Settings: Figure 7- 42. STP Instance Settings window The following information is displayed: Parameter Description Instance Type Displays the instance type(s) currently configured on the Switch. Each instance type is classified by a MSTI ID. CIST refers to the default MSTI configuration set on the Switch. Instance Status Displays the current status of the corresponding MSTI ID Instance Priority Displays the priority of the corresponding MSTI ID. The lowest priority will be the root bridge. Click Apply to implement changes made. 127