D-Link DES-3028 Product Manual - Page 148

Parameter DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch Description From/To Select a port or group of ports using the pull-down menus. Notification State Used to configure each port for sending notification to configured SNMP trap receiver(s). Enable or disable each port for sending change notification to configured SNMP trap receiver(s) if an LLDP data change is detected in an advertisement received on the port from an LLDP neighbor. The definition of change includes new available information, information timeout, and information update. In addition, the changed type includes any data update /insert/remove. Admin Status Use the drop-down menu to choose: TX_Only, RX_Only, TX_and_RX, or Disabled. Port Description Use the drop-down menu to toggle Port Description between Enabled and Disabled. System Name Use the drop-down menu to toggle System Name between Enabled and Disabled. System Description Use the drop-down menu to toggle System Description between Enabled and Disabled. System Capabilities Use the drop-down menu to toggle System Capabilities between Enabled and Disabled. Click Apply to implement changes made. 802.1 Extension LLDP Port Settings The following window is used to set up 802.1 extension LLDP on individual port(s) on the Switch. To view this window click L2 Features > LLDP > 802.1 Extension LLDP Port Settings. 134