D-Link DES-3028 Product Manual - Page 47

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch Port Description The Switch supports a port description feature where the user may name various ports on the Switch. To assign names to various ports, click Administration > Port Configuration > Port Description to view the following window: Use the From and To pull-down menu to choose a port or range of ports to describe, and then enter a description of the port(s). Click Apply to set the descriptions in the Port Description Table. The Medium Type applies only to the Combo ports. If configuring the Combo ports this defines the type of tranport medium being configured. SFP ports should be nominated Fiber and the Combo 1000BASE-T ports should be nominated Copper. The result will be displayed in the appropriate switch port number slot (C for copper ports and F for fiber ports). Port Error Disabled Figure 6- 4. Port Description window The following window will display the information about ports that have had their connection status disabled, for reasons such as STP loopback detection or link down status. To view this window, click Administration > Port Configuration > Port Error Disabled. Figure 6- 5. Port Error Disabled window The following parameters are displayed: 33