D-Link DES-3028 Product Manual - Page 80
PoE Port Configuration, Administration > PoE System > PoE Port Configuration
UPC - 790069305375
View all D-Link DES-3028 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch PoE Port Configuration To configure PoE port configuration for the Switch, click Administration > PoE System > PoE Port Configuration, which will reveal the following window for the user to configure: Figure 6- 44. PoE Port Configuration window The previous window contains the following fields to configure for PoE: Parameter Description PoE System Power Limit Sets the limit of power to be used from the Switch's power source to PoE ports. The user may configure a Power Limit between 37 and 185W (for the DES-3028P) and 37 and 370W (for the DES-3052P). The default setting is 185W (DES-3028P) and 370W (DES-3052P). Power Disconnect Method The PoE controller uses either Deny next port or Deny low priority port to offset the power limit being exceeded and keep the Switch's power at a usable level. Use the drop down menu to select a Power Disconnect Method. The default for the Power Disconnect Method is Deny next port. Both Power Disconnection Methods are described below: Deny next port - After the power limit has been exceeded, the next port attempting to power 66