D-Link DES-3028 Product Manual - Page 93

DES-3028 DES-3028P DES-3028G DES-3052 DES-3052P Layer 2 Fast Ethernet Managed Switch Figure 6- 64. Unicast Forwarding window To add or edit an entry, define the following parameters and then click Add/Modify: Parameter Description VID The VLAN ID number of the VLAN on which the above Unicast MAC address resides. MAC Address The MAC address to which packets will be statically forwarded. This must be a unicast MAC address. Port Allows the selection of the port number on which the MAC address entered above resides. Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding Table, click the corresponding X under the Delete heading. Multicast Forwarding The following figure and table describe how to set up Multicast Forwarding on the Switch. To view this window, click Administration > Forwarding & Filtering > Multicast Forwarding: Figure 6- 65. Multicast Forwarding Settings window The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's static multicast forwarding table. Click the Add button to open the Setup Static Multicast Forwarding Table window, as shown below: 79