Dell PowerConnect 5324 User's Guide - Page 134

www.dell.com | support.dell.com Mapping IP address to Domain Host Names Using the CLI Commands The following table summarizes the equivalent CLI commands for mapping Domain Host names to IP addresses. Table 6-31. Domain Host Name CLI Commands CLI Command ip host name address1 [address2 ... address8] no ip host name clear host {name | *} show hosts [name] Description Defines the static host name-to-address mapping in the host cache Removes the name-to-address mapping. Deletes entries from the host name-to-address cache. Displays the default domain name, list of name server hosts, the static and the cached list of host names and addresses. The following is an example of the CLI commands: console# enable console# configure console (config)# ip host accounting.abc.com 176.10.23.1 Configuring ARP The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical addresses. The static entries can be defined in the ARP Table. When static entries are defined, a permanent entry is entered and used to translate IP addresses to MAC addresses. To open the ARP Settings page, click System→IP Addressing→ARP in the tree view. 134 Configuring System Information