Dell PowerConnect 5324 User's Guide - Page 172
Default Timeout for Reply 1-30, Default Key String 1-128 Characters
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 172 highlights
www.dell.com | support.dell.com Source IP Address - Specifies the source IP address that is used for communication with RADIUS servers. The following fields set the RADIUS default values: Default Timeout for Reply (1-30) - Specifies the default amount of the time (in seconds) the device waits for an answer from the RADIUS server before timing out. NOTE: If host-specific Timeouts, Retries, or Dead time values are not specified, the Global values (Defaults) are applied to each host. Default Retries (1-10) - Specifies the default number of transmitted requests sent to RADIUS server before a failure occurs. Default Dead time (0-2000) - Specifies the default amount of time (in seconds) that a RADIUS server is bypassed for service requests. The range is 0-2000. Default Key String (1-128 Characters) - Specifies the Default Key string used for authenticating and encrypting all RADIUS communications between the device and the RADIUS server. This key is encrypted. Source IP Address - Specifies the source IP address that is used for communication with RADIUS servers. Usage Type - Specifies the server usage type. Can be one of the following values: login, 802.1x or all. If unspecified, defaults to all. Defining RADIUS Parameters: 1 Open the RADIUS Settings page. 2 Define the fields. 3 Click Apply Changes. The RADIUS setting are updated to the device. Adding a RADIUS Server: 1 Open the RADIUS Settings page. 2 Click Add. The Add RADIUS Server page opens: 172 Configuring System Information