Dell PowerConnect 5324 User's Guide - Page 72
Interface Configuration Mode - link aggregation
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
www.dell.com | support.dell.com Interface Configuration Mode Interface configuration commands modify specific IP interface settings, including bridge-group, description, etc. VLAN Database Mode The VLAN mode contains commands to create and configure a VLAN as a whole, for example, to create a VLAN and apply an IP address to the VLAN. The following is an example of the VLAN mode prompt: Console # vlan database Console (config-vlan)# Port Channel Mode The Port Channel mode contains commands for configuring Link Aggregation Groups (LAG). The following is an example of the Port Channel mode prompt: Console (config)# interface port-channel 1 Console (config-if)# Interface Mode The Interface mode contains commands that configure the interface. The Global Configuration mode command interface ethernet is used to enter the interface configuration mode. The following is an example of the Interface mode prompt: console> enable console# configure console(config)# interface ethernet g18 console(config-if)# Management Access List The Management Access List mode contains commands to define management access-lists. The Global Configuration mode command management access-list is used to enter the Management Access List Configuration mode. The following example shows how to create an access-list called "mlist", configure two management interfaces ethernet g1 and ethernet g9, and make the access-list the active list: Console (config)# management access-list mlist Console (config-macl)# permit ethernet g1 Console (config-macl)# permit ethernet g9 72 Using Dell OpenManage Switch Administrator