Dell PowerConnect 5324 User's Guide - Page 291
IGMP Snooping, Show All, IGMP Snooping Table, Displaying the IGMP Snooping Table
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
IGMP snooping is enabled on the device. Displaying the IGMP Snooping Table 1 Open the IGMP Snooping. 2 Click Show All. The IGMP Snooping Table opens. Configuring IGMP Snooping with CLI Commands The following table summarizes the equivalent CLI commands for configuring IGMP Snooping on the device: Table 7-79. IGMP Snooping CLI Commands CLI Command Description ip igmp snooping Enables Internet Group Membership Protocol (IGMP) snooping. ip igmp snooping mrouter learn-pimdvmrp Enables automatic learning of Multicast router ports in the context of a specific VLAN. ip igmp snooping host-time-out time- Configures the host-time-out. out ip igmp snooping mrouter-time-out time-out Configures the mrouter-time-out. ip igmp snooping leave-time-out {time-out | immediate-leave} Configures the leave-time-out. show ip igmp snooping groups Displays the Multicast groups learned [vlan vlan-id] [address ip- by IGMP snooping. multicast-address] show ip igmp snooping interface vlan-id Displays IGMP snooping configuration. show ip igmp snooping mrouter [interface vlan-id] Displays information about dynamically learned Multicast router interfaces. The following is an example of the CLI commands: Configuring Device Information 291