Dell PowerConnect 5324 User's Guide - Page 63
to copy the boot image to, the device. The following is an example of the information that appears
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
2 Ensure that the file to be downloaded is saved on the TFTP server (the rfb file). 3 Enter show version to verify which software version is currently running on the device. The following is an example of the information that appears: console# sh ver SW version 1.0.0.42 (date 22-Jul-2004 time 13:42:41) Boot version 1.0.0.18 (date 01-Jun-2004 time 15:12:20) HW version 00.00.01 (date 01-May-2004 time 12:12:20) 4 Enter copy tftp://{tftp address}/{file name} boot to copy the boot image to the device. The following is an example of the information that appears: console# copy tftp://176.215.31.3/332448-10018.rfb boot Erasing file..done. Copy: 2739187 bytes copied in 00:01:13 [hh:mm:ss] 5 Enter the reload command. The following message is displayed: console# reload This command will reset the whole system and disconnect your current session. Do you want to continue (y/n) [n]? 6 Enter y. The device reboots. Starting and Configuring the Device 63