Dell PowerConnect 5324 User's Guide - Page 182
Defining Traps, Trap Manager Table
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 182 highlights
www.dell.com | support.dell.com Defining Traps From the SNMP Trap Settings page, the user can enable or disable the device to send SNMP traps or notifications. To open the SNMP Trap Settings page, click System →SNMP→Traps in the tree view. Figure 6-73. SNMP Trap Settings SNMP Trap - Enables sending SNMP traps or SNMP notifications from the device to defined trap recipients. Authentication Trap - Enables sending SNMP traps when authentication failed to define recipients. Select Recipient IP - Specifies the IP address to whom the traps are sent. Community String - Identifies the community string of the trap manager. Traps - Determines the trap type sent to the selected recipient. The possible field values are: SNMP V1 - SNMP Version 1 traps are sent SNMP V2c - SNMP Version 2 traps are sent Remove - Removes Trap Manager Table entries, when selected. Enabling SNMP traps on the Device 1 Open SNMP Trap Settings page. 2 Select Enable in the SNMP Trap drop-down list. 3 Define the fields. 4 Click Apply Changes. 182 Configuring System Information