Dell PowerConnect 5324 User's Guide - Page 183
SNMP Trap Settings, Enable, Authentication Trap, Apply Changes, Add Trap Receiver/Manager
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
SNMP traps are enabled on the device. Enabling Authentication Traps on the Device 1 Open the SNMP Trap Settings page. 2 Select Enable in the Authentication Trap drop-down list. 3 Define the fields. 4 Click Apply Changes. Authentication traps are enabled on the device. Adding a New Trap Recipient: 1 Open the SNMP Trap Settings page. 2 Click Add. The Add Trap Receiver/Manager page opens: Figure 6-74. Add Trap Receiver/Manager 3 Define the fields. Configuring 0.0.0.0 means "All", and the traps are broadcast. 4 Click Apply Changes. The Trap Recipient/Manager is added, and the device is updated. Displaying the Trap Managers Table The Trap Managers Table contains fields for configuring trap types. 1 Open SNMP Trap Settings page. 2 Click Show All. The Trap Managers Table page opens: Configuring System Information 183