Dell PowerConnect 5324 User's Guide - Page 58

www.dell.com | support.dell.com • When initially logging onto a device through a SSH session, enter jones at the password prompt. • When changing a device's mode to enable, enter jones. Configuring an Initial HTTP Password To configure an initial HTTP password, enter the following commands: console(config)# ip http authentication local console(config)# username admin password user1 level 15 Configuring an Initial HTTPS Password To configure an initial HTTPS password, enter the following commands: console(config)# ip https authentication local console(config)# username admin password user1 level 15 Enter the following commands once when configuring to use a terminal, a Telnet, or an SSH session in order to use an HTTPS session. NOTE: In the Web browser enable SSL 2.0 or greater for the page content to be displayed. console(config)# crypto certificate generate key_generate console(config)# ip https server When initially enabling an http or https session, enter admin for user name and user1 for password. NOTE: Http and Https services require level 15 access and connect directly to the configuration level access. Startup Procedures Startup Menu Procedures The procedures called from the Startup menu cover software download, flash handling and password recovery. The diagnostics procedures are for use by technical support personnel only and are not disclosed in the document. The Startup menu can be entered when booting the device - a user input must be entered immediately after the POST test. To enter the Startup menu: 1 Turn the power on and watch for the auto-boot message SYSTEM RESET 58 Starting and Configuring the Device