Dell PowerConnect 5324 User's Guide - Page 175
radius-server timeout, radius-server retransmit, radius-server deadtime, auth-port, timeout
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Defining RADIUS Servers Using CLI Commands The following table summarizes the equivalent CLI commands for setting fields displayed in the RADIUS Settings page. Table 6-42. RADIUS Settings CLI Commands CLI Command Description radius-server timeout timeout Sets the default interval for which a device waits for a server host to reply. radius-server retransmit retries Specifies the default number of times the software searches the list of RADIUS server hosts. radius-server deadtime deadtime Configures unavailable default servers to be skipped. radius-server key [key-string] Sets the default authentication and encryption key for all RADIUS communications between the device and the RADIUS environment. radius-server host {ip-address Specifies a RADIUS server host and any non- | hostname} [auth-port default settings. auth-port-number] [timeout timeout] [retransmit retries] [deadtime deadtime] [key key-string] [source source] [priority priority] [usage type] show radius-servers Displays the RADIUS server settings. The following is an example of the CLI commands: Console (config)# radius-server timeout 5 Console (config)# radius-server retransmit 5 Console (config)# radius-server deadtime 10 Console (config)# radius-server key dell-server Console (config)# radius-server host 196.210.100.1 auth-port 1645 timeout 20 Configuring System Information 175