Dell PowerConnect 5324 User's Guide - Page 275

Each Aggregated Link has an Aggregated Link Port Type, including Gigabit Ethernet ports. Ports can be added to an Aggregated Link only if they are the same port type. When ports are removed from an Aggregated Links, the ports revert to the original port settings. To open the Link Aggregation page, click Switch→Link Aggregation in the tree view. Defining LACP Parameters The LACP Parameters page contains fields for configuring LACP LAGs. Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports with the same speed. Aggregated Links can be manually setup or automatically established by enabling Link Aggregation Control Protocol (LACP) on the relevant links. To open the LACP Parameters page, click Switch→ Link Aggregation→LACP Parameters in the tree view. Figure 7-108. LACP Parameters LACP System Priority (1-65535) - The LACP priority value for global settings. The possible range is 1- 65535. The default value is 1. Select a Port - The port number to which timeout and priority values are assigned. LACP Port Priority (1-65535) - LACP priority value for the port. LACP Timeout - Administrative LACP timeout. The possible field values are: Short - Specifies a short timeout value. Long - Specifies a long timeout value. Configuring Device Information 275