Dell PowerConnect 5324 User's Guide - Page 262

www.dell.com | support.dell.com Ingress Filtering - Enables or disables Ingress filtering on the port. Ingress filtering discards packets that are destined to VLANs of which the specific LAG is not a member. Current Reserve VLAN - The VLAN currently designated by the system as the reserved VLAN. Reserve VLAN for Internal Use - The VLAN selected by the user to be the reserved VLAN if not in use by the system. Assigning Port Settings 1 Open the VLAN Port Settings page. 2 Select the port to which settings need to be assigned from the Port drop-down menu. 3 Complete the remaining fields on the page 4 Click Apply Changes. The VLAN port settings are defined, and the device is updated. Displaying the VLAN Port Table 1 Open the VLAN Port Settings page. 2 Click Show All. The VLAN Port Table opens. Assigning Ports to VLAN Groups Using CLI Commands The following table summarizes the equivalent CLI commands for assigning ports to VLAN groups. Table 7-67. VLAN Port CLI Commands CLI Command Description switchport mode {access | trunk Configures a port VLAN membership mode. | general} switchport trunk native vlan vlan-id Defines the port as a member of the specified VLAN, and the VLAN ID as the "port default VLAN ID (PVID)". switchport general pvid vlan-id Configure the Port VLAN ID (PVID) when the interface is in general mode. switchport general allowed vlan Adds or removes VLANs from a general port. add vlan-list [tagged | untagged] switchport general acceptable- Discards untagged packets at ingress. frame-types tagged-only switchport general ingressfiltering disable Disables port ingress filtering. 262 Configuring Device Information