Dell PowerConnect 5324 User's Guide - Page 358
Embedded Web Server, Fast Forward Table., First In First Out., Full Duplex Mode
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 358 highlights
www.dell.com | support.dell.com • Full Duplex Mode - Permits for bisynchronous communication, for example, a telephone. Two parties can transmit information at the same time. • Half Duplex Mode - Permits asynchronous communication, for example, a walkie-talkie. Only one party can transmit information at a time. E Egress Ports Ports from which network traffic is transmitted. End System An end user device on a network. Ethernet Ethernet is standardized as per IEEE 802.3. Ethernet is the most common implemented LAN standard. Supports data transfer rates of Mpbs, where 10, 100 or 1000 Mbps is supported. EWS Embedded Web Server. Provides device management via a standard web browser. Embedded Web Servers are used in addition to or in place of a CLI or NMS. F FFT Fast Forward Table. Provides information about forwarding routes. If a packet arrives to a device with a known route, the packet is forwarded via a route listed in the FFT. If there is not a known route, the CPU forwards the packet and updates the FFT. FIFO First In First Out. A queuing process where the first packet in the queue is the first packet out of the packet. Flapping Flapping occurs when an interfaces state is constantly changing. For example, an STP port constantly changes from listening to learning to forwarding. This may cause traffic loss. Flow Control Enables lower speed devices to communicate with higher speed devices, that is, that the higher speed device refrains from sending packets. Fragment Ethernet packets smaller than 576 bits. Frame Packets containing the header and trailer information required by the physical medium. 358