Dell PowerConnect 5324 User's Guide - Page 206
second, Neyland# con Neylandconfig# interface ethernet g1
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
www.dell.com | support.dell.com Table 7-50. Multiple Hosts CLI Commands CLI Command Description dot1x multiple-hosts Allows multiple hosts (clients) on an 802.1Xauthorized port that has the dot1x port-control interface configuration command set to auto. dot1x single-host- Configures the action to be taken when a station, violation {forward whose MAC address is not the client (supplicant) |discard |discard- MAC address, attempts to access the interface. shutdown}[trap seconds] The following is an example of the CLI Command. Neyland# configure Neyland(config)# interface ethernet g1 Neyland(config-if)# dot1x multiple-hosts 206 Configuring Device Information
206
Configuring Device Information
www.dell.com | support.dell.com
The following is an example of the CLI Command.
Table 7-50.
Multiple Hosts CLI Commands
CLI Command
Description
dot1x multiple-hosts
Allows multiple hosts (clients) on an 802.1X-
authorized port that has the dot1x port-control
interface configuration command set to auto.
dot1x single-host-
violation {forward
|
discard |discard-
shutdow
n}
[trap
second
s]
Configures the action to be taken when a station,
whose MAC address is not the client (supplicant)
MAC address, attempts to access the interface.
Neyland# configure
Neyland(config)# interface ethernet g1
Neyland(config-if)# dot1x multiple-hosts