Dell PowerConnect 5324 User's Guide - Page 32
System LEDs, SFP Port LED, Table 2-1. - power
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
www.dell.com | support.dell.com The RJ-45 LED indications are described in the following table: Table 2-1. RJ-45 Copper based 10/100/1000BaseT LED Indications LED Left LED Right LED Color Green Static Green Flashing Orange Static Orange Flashing Green OFF Description The port is linked at 1000 Mbps. The port is transmitting or receiving data at 1000 Mbps. The port is linked at either 10 or 100 Mbps. The port is transmitting or receiving data at either 10 or 100 Mbps. The port is currently transmitting in Full Duplex mode. The port is operating in Half Duplex mode. SFP LEDs The SFP ports each have one LED marked as LNK. Figure 2-7. SFP Port LED The SFP port LED indications are described in the following table: Table 2-2. SFP Port LED Indications LED Color Description SFP Green Static The port is currently up. Green Flashing The port is currently transmitting or receiving data. OFF The port is currently down. When the SFP port is connected, the Duplex LED on the corresponding copper Combo port is Green. System LEDs The system LEDs, located on the left side of the front panel, provide information about the power supplies, fans, thermal conditions, and diagnostics. Figure 2-8 illustrates the system LEDs. 32 Hardware Description