Dell PowerConnect 5324 User's Guide - Page 209
Configuring Port Security, to a locked port are either
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
The following is an example of the CLI commands: console# show dot1x users Username -------Bob John Session Time -------1d3h 8h19m Last Auth ----58m 2m Auth Method MAC Address Remote 00:08:3b:79:87:87 None 00:08:3b:89:31:27 Interface -------g1 g2 Configuring Port Security Network security can be increased by limiting access on a specific port only to users with specific MAC addresses. The MAC addresses can be dynamically learned, up to that point, or they can be statically configured. Locked port security monitors both received and learned packets that are received on specific ports. Access to the locked port is limited to users with specific MAC addresses. These addresses are either manually defined on the port, or learned on that port up to the point when it is locked. When a packet is received on a locked port, and the packet's source MAC address is not tied to that port (either it was learned on a different port, or is unknown to the system), the protection mechanism is invoked, and can provide various options. Unauthorized packets arriving to a locked port are either: • Forwarded • Discarded with no trap • Discarded with a trap • The ingress port is disabled Configuring Device Information 209