Dell PowerConnect 5324 User's Guide - Page 218
Table 7-53., Port Configuration CLI Commands, CLI Command, Description
View all Dell PowerConnect 5324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
www.dell.com | support.dell.com Table 7-53. Port Configuration CLI Commands CLI Command Description shutdown Disables interfaces that are part of the currently set context. set interface active {ethernet Reactivates an interface that is interface | port-channel port-channel- shutdown due to security reasons. number} speed bps Configures the speed of a given ethernet interface when not using auto negotiation. autobaud Sets the line for automatic baud rate detection. duplex {half | full} Configures the full/half duplex operation of a given ethernet interface when not using auto negotiation. negotiation Enables auto negotiation operation for the speed and duplex parameters of a given interface. back-pressure Enables Back Pressure on a given interface. flowcontrol {auto | on | off | rx | tx} Configures the Flow Control on a given interface. mdix {on | auto} Enables automatic crossover on a given interface or Port-channel. show interfaces configuration [ethernet interface |port-channel port-channel-number] Displays the configuration for all configured interfaces. show interfaces status [ethernet interface | port-channel portchannel-number] Displays the status for all configured interfaces. show interfaces description Displays the description for all [ethernet interface | port-channel configured interfaces. port-channel-number] 218 Configuring Device Information