Dell PowerConnect 5324 User's Guide - Page 202

www.dell.com | support.dell.com Enabling Port Based Authentication Using the CLI Commands The following table summarizes the equivalent CLI commands for enabling the port based authentication as displayed in the Port Based Authentication page. . Table 7-49. Port Authentication CLI Commands CLI Command Description aaa authentication dot1x Specifies one or more authentication, default method1 [method2.] authorization, and accounting (AAA) methods for use on interfaces running IEEE 802.1X. dot1x max-req count Sets the maximum number of times that the device sends an EAP to the client, before restarting the authentication process. dot1x re-authenticate [ethernet interface] Manually initiates a re-authentication of all 802.1X-enabled ports or the specified 802.1Xenabled port. dot1x re-authentication Enables periodic re-authentication of the client. dot1x timeout quiet-period Sets the number of seconds that the device seconds remains in the quiet state following a failed authentication exchange. dot1x timeout re-authperiod Sets the number of seconds between re- seconds authentication attempts. dot1x timeout servertimeout seconds Sets the time for the retransmission of packets to the authentication server. dot1x timeout supp-timeout Sets the time for the retransmission of an EAP seconds request frame to the client. dot1x timeout tx-period seconds Sets the number of seconds that the device waits for a response to an EAP - request/identity frame, from the client, before resending the request. show dot1x [ethernet interface] Displays 802.1X status for the device or for the specified interface. show dot1x users [username Displays 802.1X users for the device. username] 202 Configuring Device Information