Dell PowerVault DL2200 Hardware Owner's Manual - Page 110

properly. See Entering the System Setup Program

Get Dell PowerVault DL2200 PDF manuals and user guides View all Dell PowerVault DL2200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 110 highlights

9 Press the battery toward the negative side of the connector and lift it up out of the securing tab at the negative side of the connector. 10 Support the battery connector by pressing down firmly on the positive side of the connector. 11 Hold the new battery with the "+" facing the plastic connector on the system board and slide it under the securing tabs. 12 Press the battery straight down into the connector until it snaps into place. 13 Replace the expansion-card riser. See "Installing an Expansion-Card Riser" on page 94. 14 Replace the storage controller card. See "Installing the Storage Controller Card" on page 97. 15 Replace the expansion card from the expansion-card slot, now. See "Installing an Expansion Card" on page 90. 16 Replace the cooling shroud. See "Installing the Cooling Shroud" on page 67. 17 Close the system. See "Closing the System" on page 65. 18 Reconnect the system to the electrical outlet and turn the system on, including any attached peripherals. 19 Enter the System Setup program to confirm that the battery is operating properly. See "Entering the System Setup Program" on page 40. 20 Enter the correct time and date in the System Setup program's Time and Date fields. 21 Exit the System Setup program. 110 Installing System Components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
110
Installing System Components
9
Press the battery toward the negative side of the connector and lift it
up out of the securing tab at the negative side of the connector.
10
Support the battery connector by pressing down firmly on the positive side
of the connector.
11
Hold the new battery with the "+" facing the plastic connector on the
system board and slide it under the securing tabs.
12
Press the battery straight down into the connector until it snaps into place.
13
Replace the expansion-card riser. See "Installing an Expansion-Card Riser"
on page 94.
14
Replace the storage controller card. See "Installing the Storage Controller
Card" on page 97.
15
Replace the expansion card from the expansion-card slot, now.
See "Installing an Expansion Card" on page 90.
16
Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 67.
17
Close the system. See "Closing the System" on page 65.
18
Reconnect the system to the electrical outlet and turn the system on,
including any attached peripherals.
19
Enter the System Setup program to confirm that the battery is operating
properly. See "Entering the System Setup Program" on page 40.
20
Enter the correct time and date in the System Setup program's
Time
and
Date
fields.
21
Exit the System Setup program.