Dell PowerVault DL2200 Hardware Owner's Manual - Page 79
Installing a Power Supply, Verify that both power supplies are of the same type and have the same
View all Dell PowerVault DL2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Figure 3-11. Removing and Installing a Power Supply 1 2 1 power supply 3 velcro strap 4 3 2 power supply handle 4 release latch Installing a Power Supply 1 Verify that both power supplies are of the same type and have the same maximum output power. NOTE: The maximum output power (shown in watts) is listed on the power supply label. 2 Slide the new power supply into the chassis until the power supply is fully seated and the release latch snaps into place. See Figure 3-11. NOTE: If you unlatched the cable management arm in step 2 of the previous procedure, relatch it. For information about the cable management arm, see the system's rack documentation. 3 Connect the power cable to the power supply and plug the cable into a power outlet. CAUTION: When connecting the power cable, secure the cable with the Velcro strap. Installing System Components 79