Dell PowerVault DL2200 Hardware Owner's Manual - Page 28
MEMTEST lane, failure, detected on, See Using the System Setup
View all Dell PowerVault DL2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Message Causes Corrective Actions Memory tests terminated by keystroke. POST memory test was terminated by pressing the spacebar. Information only. MEMTEST lane failure detected on x. Invalid memory configuration. Mismatched memory modules are installed. Ensure that the memory modules are installed in a valid configuration. See "General Memory Module Installation Guidelines" on page 81. Mirror mode disabled. For mirror mode, DIMMs must be installed in pairs. Pairs must be matched in size and geometry. The memory configuration Reconfigure the memory does not match the setting in modules for Memory BIOS. The BIOS setting has Mirroring mode. See been disabled. "System Memory" on page 80. No boot device available. Faulty or missing hard drive, or hard drive subsystem, or no bootable USB key installed. Use a bootable USB key or hard drive. If the problem persists, see "Troubleshooting a USB Device" on page 130 and "Troubleshooting a Hard Drive" on page 139. See "Using the System Setup Program and UEFI Boot Manager" on page 39 for information on setting the order of boot devices. 28 About Your System