Dell PowerVault DL2200 Hardware Owner's Manual - Page 68
Installing a Hard-Drive Blank, Removing a Hot-Swap Hard Drive, Removing the Front Bezel
View all Dell PowerVault DL2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Figure 3-5. Removing or Installing a Hard-Drive Blank 1 2 1 hard-drive blank 2 release lever Installing a Hard-Drive Blank Align the hard-drive blank with the drive bay and insert the blank into the drive bay until the release lever clicks into place. See Figure 3-5. Removing a Hot-Swap Hard Drive 1 If applicable, remove the front bezel. See "Removing the Front Bezel" on page 63. 2 Using the RAID management software, prepare the drive for removal. Wait until the hard-drive indicators on the drive carrier signal that the drive can be removed safely. See "Hard-Drive Indicator Patterns" on page 14. If the drive has been online, the green activity/fault indicator flashes as the drive is powered down. When the drive indicators are off, the drive is ready for removal. 3 Press the release button and open the drive carrier release handle to release the drive. See Figure 3-6. 4 Slide the hard drive out of the drive bay. 5 Insert a drive blank in the vacated drive bay. See "Installing a Hard-Drive Blank" on page 68. CAUTION: To maintain proper system cooling, all empty hard-drive bays must have hard-drive blanks installed. 68 Installing System Components