Dell PowerVault DL2200 Hardware Owner's Manual - Page 115
Front-Panel I/O Module, Removing the Front-Panel I/O Module
View all Dell PowerVault DL2200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Front-Panel I/O Module Removing the Front-Panel I/O Module CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 If installed, remove the front bezel. See "Removing the Front Bezel" on page 63. 2 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet and peripherals. 3 Using a Torx screwdriver, remove the three screws that secure the front panel I/O module to the system chassis and remove the module. 4 Remove the single screw securing the bracket to the module and remove the bracket. 5 Unlatch and disconnect the front-panel I/O cable at back of the module. See Figure 3-23. CAUTION: Do not pull on the cable to unseat the connector. Doing so can damage the cable. Installing System Components 115