Fujitsu T4215 T4215 User's Guide - Page 108

LifeBook T4200 Series Tablet PC - Appendix A 8. Enter the network SSID, in the SSID1 field. If you wish to create a profile that can connect to up to 3 different wireless networks, SSID's can be entered in the SSID2 and SSID3 fields as well. 9. Click the Security tab. 10. The Security tab allows for the configuration of the Security modes listed in the table below. Please select the radio button of the desired security mode. If these settings are not known to you, please consult with your network administrator for the correct settings. Field Name WPA WPA-PSK 802.1x Pre-Shared Key None Description Enables the use of Wi-Fi Protected Access. Choosing WPA opens the WPA EAP drop-down menu. Options include TLS and PEAP. If these settings are not known to you, please consult with your network administrator for the correct settings. Enables WPA-Pre-Shared Key. Click on the Configure button to enter the WPA Passphrase. If these settings are not known to you, please consult with your network administrator for the correct settings. Enables 802.1x security. If these settings are not known to you, please consult with your network administrator for the correct settings. Choosing this option opens the 802.1x EAP type drop-down menu. Options include TLS, PEAP, and LEAP Enables the use of pre-shared keys that are defined on both the access point and the station. This is where static WEP keys are entered. Click the Configure button to fill in the Define Pre-Shared Keys window. No security 13. The Advanced tab allows for the configuration of the options detailed in the table below. Field Name Power Save Mode Network Type 802.11b Preamble Transmit Power Level Wireless Mode Wireless Mode when Starting Ad Hoc Network Description Options are Maximum, Normal, or Off Options are AP (Infrastructure) or Ad Hoc Specifies the preamble setting in 802.11b. The default setting is Short and Long (Access Point mode), which allows both short and long headers in the 802.11b frames. Set to Long Only to override allowing short frames. Options are 100%, 50%, 25%, 12.5% or Lowest transmit power (0mW) Specifies the wireless mode in an access point network. Specifies 5GHz 54 Mbps, 5 GHz 108 Mbps, 2.4 GHz 11 Mbps, or 2.4 GHz 54 Mbps to start an Ad Hoc network if no matching network name is found after scanning all available modes. 14. Click OK 15. If the profile you just created does not activate immediately, click the Profile Management tab, highlight the desired Profile, and click Activate. 16. Click OK to close the Atheros Client Utility. 11. Click OK 12. Click the Advanced tab 100