Fujitsu T4215 T4215 User's Guide - Page 26
Display Panel - turns on but no display
View all Fujitsu T4215 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
LifeBook T4200 Series Tablet PC - Section Two Display Panel Latch Latch Release Button Figure 2-11. Opening the display Display Panel Your LifeBook T4200 Series Tablet PC contains a display panel that is backlit for easier viewing in bright environments. The convertible design of your Tablet PC allows you to open the display fully, rotate it in either direction 180 degrees, and lay it face up on the keyboard. This allows you to use the system as a tablet, much as you would a pad of paper. OPENING THE DISPLAY PANEL 1. Press the latch release button. This releases the locking mechanism. While holding the latch release, lift display cover. 2. Lift the display backwards, being careful not to touch the screen, until it is at a comfortable viewing angle. (Figure 2-11) 2. When the display is perpendicular to the keyboard, rotate it 180 degrees in either direction (Figure 2-15) so that it is facing backwards. (Figure 2-16) 3. Holding the top edge of the display panel, pull it forward until it is lying nearly atop the keyboard. 4. Push the latch towards the display (See "A" in Figure 2-12). The latch will pivot so the top latch disappears, and the bottom latch appears (See "B" in Figure 2-12). Holding the latch down, lay the display flush against the system so that the latch engages. You can now use your system as a tablet. (Figure 217) Top latch A Display Side USING THE SYSTEM AS A TABLET If you would like to use the system as a tablet, perform the following steps. The display can be rotated in either direction, but when returning the system to notebook mode, be sure to observe the display rotation light. Rotate the system display only in the direction indicated by the light. Turning the display in the incorrect direction could cause hinge damage. Bottom latch B Figure 2-12. Latching/Unlatching 5. To return the system to notebook configuration, repeat step 3 and 2. Be sure to turn the display in the direction indicated by the display rotation light (Figure 2-13). In the following step, be sure to position the display perpendicular to the keyboard, otherwise the keyboard or display cover could get scratched. ROTATE 1. Lift the display until it is perpendicular to the keyboard. (Figure 2-14). 18 Figure 2-13. Display rotation light